Fiber To Feeder Design Study
By John A. Mattson,
Scientific-Atlanta
|
1991 |
Field Experience With Feedforward Amplifiers
By Mark Adams, Scientific-Atlanta, Inc.
|
1987 |
Standard Methods For Calculation Of Carrier To Noise Ratio In Modern CATV Equipment
By Lamar West, Scientific-Atlanta, Inc.
|
1985 |
Challenges with Transmission of data over CATV networks
By Frank Koperda, Farr Farhan, Scientific-Atlanta
|
1995 |
CATV Amplifier Design
By Brian Jones, Gaylord G. Rogeness, Daniel Lieberman, Larry F. Roeshot, WIlliam H. Lambert
|
1969 |
Preparations for Deploying & Lessons Learned from Deploying High Split (204 MHz) on I-CCAP, R-PHY, & R-MACPHY - High Split as a Steppingstone Towards DOCSIS® 4.0
By Craig Coogan, CommScope, Inc.; Jamie Brown, Shaw Communications, Inc.; Zoran Maricevic, Ph. D., CommScope, Inc.
|
2022 |
Modern System Design Concepts
By Vern L. Coolidge, Scientific-Atlanta, Inc.
|
1983 |
Distortion Accumulation In Trunks
By Doug McEwen, CUC Broadcasting Umited &
Norm Slater, Comlink Systems Inc. &
Rezin Pidgeon, Scientific-Atlanta
|
1990 |
The Design, Construction, Cost And Performance The First 400 MHz Cable Television System
By Gerald Bahr, Jeff Blowers, Ed Dice, and Dan Doorn, Cox Cable Communications, Inc.
|
1981 |
High Frequency/High Density Design Criteria
By Patrick K. Mcdonough, United Cable Television Corporation
|
1987 |
Computer Aided Design In A Tapped Trunk Environment
By Bob Romerein and Dan Kolis, Lindsay Specialty Products Limited
|
1985 |
Cable Repeater Station Design Using Fixed Gain Block Preamplifier And Poweramplifier
By Gaylord G. Rogeness,
Anaconda CATV
|
1974 |
CATV Headend Engineering
By Steven I. Biro, George C. Kanen, Philip D. Hamlin, Patrick R. J. Court, Floyd O. Vincent, B.R. Carter
|
1969 |
Synchronizing Deep Fiber Baseband Access Network Design With Traditional HFC Infastructure
By Donald Sorenson,Scientific-Atlanta, Inc
|
2001 |
Constructing A Conventional Hardened Trunk
By David G. Hevey,
Warner Cable Communications Inc.
|
1992 |
Temperature, Temperature Design, and Automatic Level Control for CATV
By James R. Palmer
|
1967 |
Fiber Induced Distortion And Phase Noise To Intensity Noise Conversion In Externally Modulated CATV Systems
By Dogan A. Atlas, Scientific-Atlanta, Inc
|
1996 |
Computer-Aided Design (CAD) Of TVRO Earth Stations
By Preston A. White Ill, Scientific-Atlanta, Inc.
|
1985 |
Bandwidth-Efficient, High-Speed Modems For Cable Systems
By Stephen W. Klare and J. M. Rozmus, Scientific-Atlanta
|
1982 |
Computer-Aided CATV System Design
By Richard L. Amell, Cox Cable Communications, Inc.
|
1979 |
