Practical System Design Based On Complete Equipment Evaluation
By Jerry A. Laufer, Total Telecable, Inc. and Robert J. Brown, Tele-Vue Systems, Inc.
|
1967 |
Transient Considerations For CATV Systems
By Robert N. O'Hara, Theta-Com
|
1975 |
Technical Considerations Of Two-way Interactive CATV
By Niraj Jain, Tarek Saadawi, And Mischa Schwartz, Philips Laboratories
|
1985 |
Design Considerations For Addressable Multi-dwelling Terminals
By Patrick J. Birney, Pioneer Communications Of America, Inc.
|
1982 |
CATV Headend Engineering
By Steven I. Biro, George C. Kanen, Philip D. Hamlin, Patrick R. J. Court, Floyd O. Vincent, B.R. Carter
|
1969 |
System Considerations In Applications Of 18ghz Microwave To CATV
By T. M. Straus and R. T. Hsu, Hughes Aircraft Company
|
1986 |
Thermal Design And Test Requirements For Outside Plant Cable Telecommunications Equipment
By Al Marshall, P.E., Philips Broadband Networks
|
2001 |
Implications Of The Developing Operating Environment On CATV Terminal Equipment
By Geoffrey W. Gates, Cox Cable Communications, Inc.
|
1985 |
Design Considerations For A Bandwidth Efficient Split-band Trunk Station
By Joseph P. Preschutti,
C-COR Electronics, Inc.
|
1983 |
Off-Premises Addressability System Design And Operational Considerations
By Joseph P. Preschutti, AM Cable TV Industries, lnc
|
1985 |
Design Considerations For Enhancement Of A Large Urban Coaxial Cable System
By Williah E. Evans,
Hanitoba Telephone Systeh
|
1983 |
Practical Considerations For BTSC Stereo In The CATV Plant
By David A. Sedacca, Scientific-Atlanta
|
1987 |
Earth Station Design Considerations For 2° C Band Satellite Spacing
By Norman Weinhouse, Hughes Communication, Inc.
|
1983 |
Considerations For Transient And Surge Protection In Catv Systems
By Derald D. Cummings, Director of Research & Development and George P. Dixon, Vice President & Chief Engineer
|
1972 |
A Computer Design Of CATV Distribution Systems
By Ivan T. Frisch, Vice President, Bill Rothfarb, Sr. Engineer, Aaron Kershenbaum, Sr. Engineer, Network Analysis Corporation
|
1971 |
Deploying Telephony Services Over CATV Systems: Systems And Architectural Considerations
By Gaylord A. Hart, XEL Communications and Richard Lyford, ANTEC
|
1994 |
The Design Approach To A New CATV Distribution Amplifier
By Alan J. Schlenz, Scientific-atlanta, Inc.
|
1983 |
Standard Methods For Calculation Of Carrier To Noise Ratio In Modern CATV Equipment
By Lamar West, Scientific-Atlanta, Inc.
|
1985 |
Critical Considerations For The Design Of A Robust And Scalable DAA Aggregation And Transport Network
By Jon Baldry, Infinera
|
2018 |
The Design Of A High Efficiency CATV Trunk Power Supply
By Frank R. Little Jr., Scientific-Atlanta, Inc
|
1986 |
